Populus X

Compact access controllers

Populus X
    • 1
    • -
    • Populus X access controllers

      The Populus X is a compact access controller with a card holder and a built-in card reader with 125 kHz or 13,56 MHz reading frequencies. It can be used as a hotel card switch, for switching on electrical devices, activation / deactivation of alarm systems, vehicle control, etc. The controllers can store up to 30,000 users and 100,000 events.

    • 2
    • -
    • Features

      With a card holder
      Dimensions: 90 x 90 x 20 mm ("On-the-wall" mounting)
      90 x 90 x 12 mm ("In-the-wall" mounting)
      Can store up to 30.000 users and 100,000 events
      Operating temperature: from -20 °C to +40 °C
      Inputs for door status control and a push button
      Door strike transistor output (0.5 A)
      Reading frequency: 125 kHz or 13,56 MHz
      Reading range up to 12 cm (for 125 kHz) or up to 7 cm (for 13,56 MHz)
      Status signalization with LED coloring of the transparent screen and buzzer signals

    • 3
    • -
    • "On-the-wall" and "In-the-wall" mounting

      The standard installation version with the enclosed rear part of the housing is intended for "On-the-wall" installation.
      Alternatively, "In-the-wall" installation is possible with the use of the special Wall Box accessory, which can be empty or equipped with a power supply device with a mechanical or electronic relay. Customized wiring is required when installing the device "In-the-wall".

    • 4
    • -
    • Highly resistant to dust and water

      When the Populus X controller is monuted "In-the-Wall" its housing becomes completely waterproof and dust-resistant. Thus it is suitable to be installed outdoor or in dusty and humid environments.

    • 5
    • -
    • Ordering codes


      Code Specification
      POPULUS X-1-A Compact access controller with built in card reader (125 kHz) and card reader, in X-A box
      POPULUS X-3-A Compact access controller with built in card reader (13,56 MHz) and card reader, in X-A box
    • 6
    • -
    • Accessories

      A special Wall Box for the device is available for "in-the-wall" mounting. The Wall Box comes in two versions: empty and equipped with a power supply device with a mechanical or electronic relay. The power supply is powerful enough to power a controller and a door strike.

    • 7
    • -
    • Ordering codes for accessories


      Code Specification
      WALL BOX Empty wall box
      WALL BOX W-R Wall box with power supply and mechanical relay
      WALL BOX W-S Wall box with power supply and electronic relay
Contact us for further information ... Contact