Reader O and K

Readers with protocol output

Populus O & K
    • 1
    • -
    • Readers with protocol output

      Readers with a protocol output and a capacitive keypad or screen. They can be used in combination with the Populus controllers and the Regis T time attendance registrators. The readers are suitable for unlocking doors in office buildings, government and financial institutions, offices, server rooms, research and development centers, archives, warehouses, laboratories, hospitals, etc.

    • 2
    • -
    • Features

      With a capacitive screen or keypad
      Dimensions: 90 x 90 x 20 mm ("On-the-wall" mounting)
      90 x 90 x 12 mm ("In-the-wall" mounting)
      Operating temperature: from -20 °C to +40 °C
      Reading frequency: 125 kHz or 13,56 MHz
      Reading range up to 12 cm (for 125 kHz) or up to 7 cm (for 13,56 MHz)
      Maximum current consumption: up to 0.1 A
      Status signalization with LED coloring of the transparent screen and buzzer signals

    • 3
    • -
    • "On-the-wall" and "In-the-wall" mounting

      The standard installation version with the enclosed rear part of the housing is intended for "On-the-wall" installation.
      Alternatively, "In-the-wall" installation is possible with the use of the special Wall Box accessory, which can be empty or equipped with a power supply device with a mechanical or electronic relay. Customized wiring is required when installing the device "In-the-wall".

    • 4
    • -
    • Highly resistant to dust and water

      When the readers are monuted "In-the-Wall" their housing becomes completely waterproof and dust-resistant. Thus they are suitable to be installed outdoor or in dusty and humid environments.

    • 5
    • -
    • Ordering codes

      Code Specification
      READER O-1-A Reader (125 kHz) in O-A box
      READER K-1-A Reader (125 kHz) in K-A box with a capacitive keypad
      READER O-3-A Reader (13,56 MHz) in O-A box
      READER K-3-A Reader (13,56 MHz) in K-A box with a capacitive keypad
    • 6
    • -
    • Accessories

      A special Wall Box for the device is available for "in-the-wall" mounting. The Wall Box comes in two versions: empty and equipped with a power supply device with a mechanical or electronic relay. The power supply is powerful enough to power a controller and a one-directional 12V door strike.

    • 7
    • -
    • Ordering codes for accessories

      Code Specification
      WALL BOX Empty wall box
      WALL BOX W-R Wall box with power supply and mechanical relay
      WALL BOX W-S Wall box with power supply and electronic relay
Contact us for further information ... Contact