Products for installation in hotels and apartments are part of our new A-Line product line, which was designed specifically in consideration of the particular needs and requirements of the tourism industry. Thus we have compiled compact kits for access control and electricity consumption control in hotel rooms, which can be connected to the dedicated Codeks software for hotels and are also compatible with our standard access control equipment. This allows you to fully monitor access control throughout the hotel including individual hotel rooms as well as all hotel common areas (e.g. parking lots, wellness, dining rooms, etc.).
Rex K-3-H-4BNx
Access controller for hotels and apartments

Dedicated access controller with an illuminated capacitive keypad and a built-in reader specially adapted to control the entry into apartments or hotel rooms with the Codeks Apartment Kit or Codeks Hotel software.
dimensions: 90×90×20mm |
reading frequency: 13.56MHz |
reading distance: up to 5cm |
memory for up to 20 cards, key tags or numerical codes and up to 1000 events |
RS-485 and TCP/IP communication, Bluetooth communication |
* power supply: 9 to 14V DC (Spider W5-B, Spider W40, Spider W40-B, Spider H20, Spider H20-B) |
maximum current consumption: 0.2A |
anti-tamper protection, buzzer |
status signalisation by the changing colour of the transparent part of the housing (white – locked, green – unlocked, red – error) |
IP42 protection – suitable for indoor use |
operating temperature: -20 to +40°C |
Rex O-3-H-4BNx
Access controller for hotels and apartments

Dedicated access controller with an illuminated capacitive display and a built-in reader specially adapted to control the entry into apartments or hotel rooms with the Codeks Apartment Kit or Codeks Hotel software.
dimensions: 90×90×20mm |
reading frequency: 13.56MHz |
reading distance: up to 5cm |
memory for up to 20 cards, key tags or numerical codes and up to 1000 events |
RS-485 and TCP/IP communication, Bluetooth communication |
* power supply: 9 to 14V DC (Spider W5-B, Spider W40, Spider W40-B, Spider H20, Spider H20-B) |
maximum current consumption: 0.2A |
anti-tamper protection, buzzer |
status signalisation by the changing colour of the transparent part of the housing (white – locked, green – unlocked, red – error) |
IP42 protection – suitable for indoor use |
operating temperature: -20 to +40°C |
Kit H1-3-4BNx
Reader with a keypad and access controller with a card holder

The dedicated basic kit to control the entries and powering of electricity in apartments and hotel rooms.
The kit contains:
- a reader of contactless cards and key tags with an illuminated capacitive keypad to control entries into a room,
- an access controller with a card holder for switching the room’s electricity on/off.
The equipment is specially designed for use with the dedicated Codeks Apartment Kit or Codeks Hotel software.
dimensions: 90×90×20mm |
reading frequency: 13.56MHz |
reading distance: up to 5cm |
memory for up to 20 cards, key tags or numerical codes and up to 1000 events |
RS-485 and TCP/IP communication, Bluetooth communication |
* power supply: 9 to 14V DC (Spider W5-B, Spider W40, Spider W40-B, Spider H20, Spider H20-B) |
maximum current consumption: 0.2A |
anti-tamper protection |
input for an exit button and a door status control switch |
transistor output for an electric lock (0.5A) |
status signalisation with a buzzer and by the changing colour of the transparent part of the housing (white – locked, green – unlocked, red – error) |
IP42 protection – suitable for indoor use |
operating temperature: -20 to +40°C |
Kit H2-3-4BNx
Reader and access controller with a card holder

The dedicated basic kit to control the entries and powering of electricity in apartments and hotel rooms.
The kit contains:
- a reader of contactless cards and key tags with an illuminated capacitive display to control entries into a room,
- an access controller with a card holder for switching the room’s electricity on/off.
The equipment is specially designed for use with the dedicated Codeks Apartment Kit or Codeks Hotel software.
dimensions: 90×90×20mm |
reading frequency: 13.56MHz |
reading distance: up to 5cm |
memory for up to 20 cards, key tags or numerical codes and up to 1000 events |
RS-485 and TCP/IP communication, Bluetooth communication |
* power supply: 9 to 14V DC (Spider W5-B, Spider W40, Spider W40-B, Spider H20, Spider H20-B) |
maximum current consumption: 0.2A |
anti-tamper protection |
input for an exit button and a door status control switch |
transistor output for an electric lock (0.5A) |
status signalisation with a buzzer and by the changing colour of the transparent part of the housing (white – locked, green – unlocked, red – error) |
IP42 protection – suitable for indoor use |
operating temperature: -20 to +40°C |
Additional equipment for hotels
In addition to access controllers and readers, the following additional equipment for hotel rooms is available:
Protocol reader with an illuminated display designed for installation in hotels and apartments. The large illuminated area of the central part signals the device’s status and also lightly illuminates the surrounding area. A large number of readers is entirely sufficient to illuminate hallways or rooms at night and sometimes it is even possible to switch off the primary light source and thus additionally reduce electricity costs.
dimensions: 90×90×20mm |
reading frequency: 13.56MHz |
reading distance: up to 7cm |
communication with the controller: 26-bit Wiegand or Jantar protocol |
* power supply: 9 to 14V DC (Populus P, Regis T) |
maximum current consumption: 0.1A |
status signalisation by the changing colour of the transparent part of the housing (white – locked, green – unlocked, red – error) |
IP42 protection – suitable for indoor use |
operating temperature: -20 to +40°C |
Protocol reader with a capacitive keyboard designed for installation in hotels and apartments. It is usually installed at the room’s entrance and guests must enter a PIN code to access the room. It is connected to the hotel’s controller, which is installed inside the room on the secure side of the door.
dimensions: 90×90×20mm |
reading frequency: 13.56MHz |
reading distance: up to 7cm |
communication with the controller: 26-bit Wiegand or Jantar protocol |
* power supply: 9 to 14V DC (Populus P, Regis T) |
maximum current consumption: 0.1A |
status signalisation by the changing colour of the transparent part of the housing (white – locked, green – unlocked, red – error) |
IP42 protection – suitable for indoor use |
operating temperature: -20 to +40°C |
Reader X-3-A
Reader with a card holder

Protocol reader with a card holder designed for installation in hotels and apartments. With a card holder it is possible to manage the rooms’ electricity use and thus save electricity and simultaneously gain information about the guest’s presence in the room.
dimensions: 90×90×20mm |
reading frequency: 13.56MHz |
reading distance: up to 7cm |
communication with the controller: 26-bit Wiegand or Jantar protocol |
* power supply: 9 to 14V DC (Populus P, Regis T) |
maximum current consumption: 0.1A |
status signalisation by the changing colour of the transparent part of the housing (white – locked, green – unlocked, red – error) |
IP42 protection – suitable for indoor use |
operating temperature: -20 to +40°C |
Switch
On/off switch for lights

Illuminated on/off switch for lights. The large illuminated area of the central part signals the device’s status and also lightly illuminates the surrounding area. A large number of switches is entirely sufficient to illuminate hallways or rooms at night and sometimes it is even possible to switch off the primary light source and thus additionally reduce electricity costs.
dimensions: 90×90×20mm |
communication with the controller: RS-485 communication |
* power supply: 9 to 14V DC (Spider W5/W5-B, Spider W40/40-B, Power H-20) |
maximum current consumption: 0.2A |
status signalisation by the changing colour of the transparent part of the housing (white – locked, green – unlocked, red – error) |
IP42 protection – suitable for indoor use |
operating temperature: -20 to +40°C |
Related products
-
“We provide advice and prepare the best offer, which includes solutions for all your needs.”